Module, Totally Integrated Power (TIPM): Removal
WARNING: This page is about a different car, the 2017 Jeep Patriot and 2017 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
- Open hood.
- Disconnect and isolate the battery negative cable.
- Disconnect each of the Totally Integrated Power Module (TIPM) wire harness connectors.
- Remove the TIPM positive cable retaining nut and remove the cable from the stud.
- Depress the three mounting clips to disengage and remove the TIPM housing from its mounting bracket.
- Remove the TIPM from the vehicle.