FixVault
Home › Jeep › 2012 › Grand Cherokee Laredo, AWD › Repair and Diagnosis › Electrical › Charging Systems › Charging System (Service Information) › Generator › Removal › 3.0L Diesel

3.0L Diesel

  1. Disconnect the negative battery cable.
  2. Remove the coolant recovery bottle. Refer to BOTTLE, COOLANT RECOVERY, REMOVAL .
  3. Remove the cooling fan. Refer to FAN, COOLING, REMOVAL .
  4. Remove the lower radiator hose.
  5. Remove the upper radiator at thermostat housing.
  6. Remove the serpentine belt. Refer to BELT, SERPENTINE, REMOVAL .
    Fig 1: Nut, Ground Cable, Field Generator Connector, Protective Cover, B+ Cable & B+ Nut
    GC0153866Courtesy of CHRYSLER GROUP, LLC
  7. Remove the nut (3) and the ground cable (2) from the generator.
  8. Disconnect the field generator connector (4).
  9. Remove the protective cover (1) from the B+ cable (6).
  10. Remove the B+ nut (5) and cable (6) from the generator.
    Fig 2: Upper Generator Bolt, Nut & And Stud
    GC0153865Courtesy of CHRYSLER GROUP, LLC
  11. Remove the upper generator bolt (1), nut (2), and stud (3).
  12. Remove the two lower bolts (5) and the generator (4).
About FixVault