3.6L Engine
WARNING: This page is about a different car, the 2011 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Clean block core hole and heater seat.
- Insert heater block (1) assembly.
- With block heater seated, tighten screw (2) to 12N.M (106 in.lbs.) to assure a positive seal.
- Install power cord plug to block heater (1).
- Fill cooling system with coolant to the proper level. Refer to STANDARD PROCEDURE .
- Install the A/C compressor. Refer to COMPRESSOR, A/C , INSTALLATION .