FixVault
Home › Jeep › 2012 › Liberty Limited Jet, 4WD, Part Time › Repair and Diagnosis (Single Page) › Accessories & Equipment › Communication Devices › Electronic Control Modules (Service Information) › Module, Glow Plug › Installation › Installation

Module, Glow Plug: Installation: Installation

Fig 1: Identifying Glow Plug Relay (Module), ECM Mounting Bracket, Electrical Connector & Pin
GC0085960Courtesy of CHRYSLER GROUP, LLC
NOTE:

The glow plug module (1) is located in the engine compartment. It is attached to the Powertrain Control Module (PCM) mounting bracket (2).

  1. Connect glow plug module wire harness connector (3) to glow plug module (1).
  2. Position the glow plug module to mounting bracket (2) and install pin (4).
About FixVault