Charging System (Service Information): Generator: Removal: 2.8L

Fig 1: Generator Electrical Connector - 2.8L Diesel

Courtesy of CHRYSLER GROUP, LLC

1. Disconnect the negative battery cable at battery.
2. Disconnect the field wire connector (2) at side of generator by pushing on connector tab.
3. Remove the B+ cable output terminal mounting nut (1). Disconnect terminal from generator.
4. Remove the serpentine belt. Refer to BELT, SERPENTINE, REMOVAL .
   Fig 2: Generator Mounting 2.8L Diesel

   Courtesy of CHRYSLER GROUP, LLC
5. Remove the two upper generator mounting bolts (1).
6. Remove the two lower generator mounting bolts (2).
7. Remove the generator from the vehicle.