FixVault
Home › Jeep › 2012 › Wrangler Rubicon, Automatic Trans › Repair and Diagnosis › External Pages › Different car › Section 152 (Engine Cooling System) › Engine › Sensor, Coolant Temperature › Installation › 2.0L Diesel

2.0L Diesel

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Cooling Temperature Sensor & Wire Harness Connector
GC0159853Courtesy of CHRYSLER GROUP, LLC
  1. Apply MOPAR™ thread sealant with PFTE part number 04318034 to sensor threads.
  2. Install the Engine Cooling Temperature (ECT) sensor (2) and tighten to 11 N.m (8 ft. lbs.).
  3. Connect the ECT sensor wire harness connector (1).
    Fig 2: Engine Cover
    GC0148021Courtesy of CHRYSLER GROUP, LLC
  4. Install the engine cover (1).
  5. Fill the cooling system. Refer to STANDARD PROCEDURE .
  6. Connect the negative battery cable.
About FixVault