FixVault
Home › Jeep › 2012 › Wrangler Rubicon, Automatic Trans › Repair and Diagnosis › External Pages › Different car › Section 191 (Electronic Control Modules (Service Information)) › Module, Transmission Control › Installation › Installation

Module, Transmission Control: Installation: Installation

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the Transmission Control Module (TCM) to the vehicle for installation.
  2. Secure the TCM to the vehicle using fasteners.
  3. Connect the wiring harness connections to the TCM.
  4. Install the knee bolster/steering column lower panel. Refer to COVER, STEERING COLUMN OPENING, INSTALLATION .
  5. Connect the negative battery cable.
  6. Perform the TCM adaptation relearn. Refer to MODULE, TRANSMISSION CONTROL, MODULE PROGRAMMING .
About FixVault