Starting System (Service Information): Starter: Removal: Gas

Fig 1: Mounting Bolts

Courtesy of CHRYSLER GROUP, LLC

1. Remove air cleaner box and air tube.
2. Disconnect and isolate the battery negative cable
3. Remove starter motor mounting bolt.
   Fig 2: Throttle Body Electrical Connector

   Courtesy of CHRYSLER GROUP, LLC
4. Disconnect the electrical connector at throttle body.
   Fig 3: Throttle Body Bracket

   Courtesy of CHRYSLER GROUP, LLC
5. Remove throttle body bolts and remove throttle body.
   Fig 4: Rotating Starter

   Courtesy of CHRYSLER GROUP, LLC
6. Push starter under intake manifold.
7. Tip starter nose toward cooling module.
8. Pull starter up and out.
   Fig 5: Starter Electrical Connectors

   Courtesy of CHRYSLER GROUP, LLC
9. Disconnect starter motor wiring.
10. Remove starter motor from vehicle.