Section 320 (Rear Axle): Specifications: Specifications
WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
AXLE SPECIFICATIONS
| DESCRIPTION | SPECIFICATION |
|---|---|
| Axle Ratio | 3.21, 3.73, 4.10 |
| Ring Gear Diameter | 226 mm (8.89 in.) |
| Ring Gear Runout | 0.12 mm (0.005 in.) |
| Ring Gear Backlash | 0.12 - 0.20 mm (0.005 - 0.008 in.) |
| Pinion Torque To Rotate - Original Bearings | 1 - 2.2 N.m (10 - 20 in. lbs.) |
| Pinion Torque To Rotate - New Bearings | 2.2 - 4.5 N.m (20 - 40 in. lbs.) |
| Total Torque To Rotate: Pinion Torque To Rotate plus | 0.79 - 1.24 N.m (7 - 11 in. lbs.) |
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | COMMENT |
|---|---|---|---|---|
| Fill Plug | 34 | 25 | - | |
| Drain Plug | 34 | 25 | - | |
| Differential Cover Bolts | 41 | 30 | - | |
| Bearing Cap Bolts | 108 | 80 | - | |
| Hub Bearing Bolts | 102 | 75 | - | |
| Ring Gear Bolts | 100 + 90° | 74 + 90° | - | Do not reuse these fasteners. If removed, a NEW fastener must be installed and tightened to specifications. |
| Pinion Nut | 217 - 271 | 160 - 200 | - | Do not reuse these fasteners. If removed, a NEW fastener must be installed and tightened to specifications. |
| Axle Retainer Nuts | 61 | 45 | - |