FixVault
Home › Jeep › 2014 › Cherokee Sport, AWD › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Electronic Control Modules (Service Information) › Module, Transmission Control › Removal › Removal

Module, Transmission Control: Removal: Removal

  1. Position vehicle on a suitable hoist with the transaxle in neutral. Refer to HOISTING, STANDARD PROCEDURE .
  2. Release the hood latch and open the hood.
  3. Raise the vehicle enough to gain access to the left front wheel.
  4. Remove the left front wheel. Refer to REMOVAL .
  5. Through the opening rearward of the suspension strut, remove the lower bolts holding the TCM to the transaxle located below the power brake booster.
  6. Lower the vehicle.
  7. Remove the engine cover.
    Fig 1: Identifying Wire Connector Lock To TCM
    GC0159257Courtesy of CHRYSLER GROUP, LLC
  8. Disengage the lock (1) holding the wire connector to the TCM.
  9. Separate the wire connector from the TCM.
  10. Remove the bolts holding the top of the TCM to the transaxle.
  11. Separate the TCM from the vehicle.
About FixVault