Manifold Flow Valve: Installation: Installation

WARNING: This page is about a different car, the 2013 Jeep Patriot and 2013 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Flow Management Shaft Slot

Courtesy of CHRYSLER GROUP, LLC

Make sure that slot in shaft is not damaged.

Fig 2: Flow Management Valve Shaft
Courtesy of CHRYSLER GROUP, LLC
Make sure that tab in valve is not damaged.

Fig 3: Flow Valve Shaft & Mount
Courtesy of CHRYSLER GROUP, LLC
Align tab in valve with slot in intake manifold shaft (2) and rotate valve counterclockwise until valve drops onto location pin mounting (1).

Fig 4: Manifold Flow Valve Electrical Connector
Courtesy of CHRYSLER GROUP, LLC
Install mounting bolts (1) and tighten to 6 N.m (53 in. lbs.).
Connect electrical connector (2).
Install air tube.
Connect negative battery cable.