Set Condition

Condition one: 

All  the below conditions must be present for the period of 5 seconds for the DTC to set:

• Engine speed minus Input speed is greater than 1000 RPM for the period of 5 seconds.
• Engine speed minus Secondary speed estimated ratio is greater than 1000 RPM for the period of 5 seconds.
• Secondary speed multiplied by the estimated ratio minus the primary speed is less than 1000 RPM.

Condition two: 

• Engine speed is less than 450 RPM and the Input speed is greater than or equal to 1000 RPM for the period of 20 msec.