Valve, Fuel Quantity Control: Removal: Removal

Fig 1: Engine Cover

Courtesy of CHRYSLER GROUP, LLC

1. Disconnect the negative battery cable.
2. Remove the engine cover (1).
3. Remove the mixing chamber.
4. Clean surrounding area by the fuel quantity control valve.
   Fig 2: Fuel Quantity Control Valve Harness Connector

   Courtesy of CHRYSLER GROUP, LLC
5. Disconnect the fuel quantity control valve wire harness connector (1).
   Fig 3: Fuel Quantity Control Valve & Bolts

   Courtesy of CHRYSLER GROUP, LLC
6. Remove bolts (2) and the fuel quantity control valve (1).