FixVault
Home › Jeep › 2014 › Compass Limited, AWD, Automatic Trans › Repair and Diagnosis › Engine Performance › Ignition System (Service Information) › Solenoid, Variable Valve Timing › Removal › Rear Solenoid 1/2

Rear Solenoid 1/2

Fig 1: Solenoid Location 1/2
GC0082440Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect negative battery cable.
  2. Remove engine cover.
  3. Disconnect variable valve timing solenoid electrical connector.
  4. Remove variable valve timing solenoid mounting bolt.
    Fig 2: Solenoid Mounting Tab 1/2
    GC0082441Courtesy of CHRYSLER GROUP, LLC
  5. Pull solenoid straight out of cylinder head.
About FixVault