Relearn, After Replacing A Transaxle
WARNING: This page is about a different car, the 2013 Jeep Patriot and 2013 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition key to RUN.
- Clear learning memory using the scan tool.
- Turn the ignition key to OFF/LOCKED for 2 seconds.
- Turn the ignition key to RUN Clear DTCs.
- Turn the ignition key to OFF/LOCKED for 2 seconds.
- Turn ignition key to RUN.
- After at least 7 seconds, read DTCs.
- If DTCs resets Refer to DIAGNOSIS AND TESTING .