FixVault
Home › Jeep › 2014 › Compass Limited, AWD, Automatic Trans › Repair and Diagnosis › Transmission › Automatic Trans › Engine Cooling System › Accessory Drive › TENSIONER, Belt › Removal › Diesel Engine

Diesel Engine

Fig 1: Tensioner Bracket Mounting Bolts
GC0137781Courtesy of CHRYSLER GROUP, LLC
  1. Remove the accessory drive belt. Refer to BELT, SERPENTINE, REMOVAL .
  2. Lower the vehicle.
  3. Remove the tensioner bracket mounting bolts (1, 2 3).
  4. Raise and support the vehicle.
  5. Remove the tensioner assembly (4) from underneath the vehicle.
  6. If idler pulley is to be replaced, remove pulley from tensioner (4).
About FixVault