Section 3 (Front Suspension): Front: Specifications: Specifications
WARNING: This page is about a different car, the 2009 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Front Shock Absorber Clevis Bracket Upper Nut | 108 | 80 | - |
| Front Shock Absorber Clevis Bracket Lower Nut | 150 | 110 | - |
| Front Shock Absorber Top (4) Mounting Nuts | 108 | 80 | - |
| Front Shock to Spring and Insulator Nut | 41 | 30 | - |
| Upper Suspension Arm Front Nut | 122 | 90 | - |
| Upper Suspension Arm Rear Nut | 122 | 90 | - |
| Lower Suspension Arm Front Nut | 170 | 125 | - |
| Lower Suspension Arm Rear Nut | 170 | 125 | - |
| Stabilizer Bar Clamp Nut | 149 | 110 | - |
| Stabilizer Bar Link Upper Nut | 115 | 85 | - |
| Stabilizer Bar Link Lower bolt | 102 | 75 | - |
| Hub/Bearing Bolt | 130 | 96 | - |
| Hub/Bearing Halfshaft Nut | 136 | 100 | - |
| Upper Ball Joint Nut Tighten to 41 N.m (30 ft lbs), make sure nut is seated to the knuckle. Rotate nut to an additional 90° | 41 plus Rotate nut to an additional 90° | 30 plus Rotate nut to an additional 90° | - |
| Lower Ball Joint Nut Tighten to 54 N.m (40 ft lbs), make sure nut is seated against knuckle. Rotate nut an additional 90° | 54 plus Rotate nut an additional 90° | 40 plus Rotate nut an additional 90° | - |
| Outer Tie Rod End Nut to Knuckle | 41 plus Rotate nut an additional 90° | 30 plus Rotate nut an additional 90° | - |
| Wheel Speed Sensor | 13.5 | 10 | - |