FixVault
Home › Jeep › 2014 › Grand Cherokee Laredo, AWD › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Electronic Control Modules (Service Information) › Module, Adaptive Front Lighting System › Standard Procedure › Standard Procedure - AFLS Calibration

Standard Procedure - AFLS Calibration

NOTE:

The following procedure is necessary and should be performed ONLY after an Adaptive Front Lighting System (AFLS) module is replaced with a new (uncalibrated) unit.

  1. Before beginning, the vehicle should be empty with between 1/4 and 1/2 tank of fuel.
  2. Perform a mechanical Front Lamp Alignment of the headlamps. Refer to STANDARD PROCEDURE .
  3. Calibrate the AFLS. Follow the steps outlined in the diagnostic scan tool under the AFLS Electronic Control Unit (ECU), Miscellaneous Functions, AFLS Calibration.
About FixVault