Module, Electronic Limited Slip Differential: Installation: Installation

Fig 1: Electronic Limited Slip Differential Module & Connectors

Courtesy of CHRYSLER GROUP, LLC

1. Install the module in the vehicle.
2. Secure the module mounting nuts (2) and tighten to 7 N.m (5 ft. lbs.).
3. Connect the body wire harness connectors (3) to the module connector receptacle.
4. Install carpet in original position.
5. Install left rear seat. Refer to SEAT, REAR, REMOVAL .
6. Connect the negative battery cable. Refer to CABLES, BATTERY, INSTALLATION for battery location and cable connection procedure.