Diagnostic Test

FORWARD FACING CAMERA VERIFICATION TEST 

1. Disconnect all jumper wires and reconnect all previously disconnected components and connectors.
2. With the scan tool, erase Forward Facing Camera (FFCM) DTCs.
3. Make sure that all accessories are turned off and that the battery is fully charged.
4. If the FFCM was replaced or moved in any way, with the scan tool, perform the Forward Facing Camera - Calibration Procedure. Refer to MODULE, FORWARD FACING CAMERA, STANDARD PROCEDURE .
5. With the scan tool, read FFCM DTCs.

   Are there any DTCs present in the FFCM?

   Yes 

   • Refer to DIAGNOSIS AND TESTING  and perform the appropriate diagnostic procedure.

   No 

   • Repair is complete.