Module, Powertrain Control: Removal: 2.4L/3.2L

CAUTION:

Do not disconnect the Powertrain Control Module (PCM) electrical connectors before the ignition key is in the off position and the battery cable disconnected. If these steps are not preformed damage to the PCM may result from a voltage spike.

Fig 1: Powertrain Control Module Electrical Connectors & Nuts

Courtesy of CHRYSLER GROUP, LLC

Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
Disconnect the Power Train Control module electrical connector (1).
Remove the nuts (2, 3) that secure the PCM to the PCM mount

Fig 2: Battery Tray, PCM Mount & Bolts
Courtesy of CHRYSLER GROUP, LLC
If required, remove the PCM mount (3).