Module, Powertrain Control: Removal: Diesel

Fig 1: Powertrain Control Module (PCM) & Harness Connectors

Courtesy of CHRYSLER GROUP, LLC

1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
2. Disconnect the Powertrain Control Module (2) (PCM) wire harness connectors (1).
   Fig 2: Powertrain Control Module (PCM), Nuts & Bolts

   Courtesy of CHRYSLER GROUP, LLC
3. Remove nut (3), bolts (2) and the Powertrain Control Module (PCM) (1).