Sensor, Fuel Temperature: Removal: Removal
WARNING: This page is about a different car, the 2012 Jeep Patriot and 2012 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the engine cover.
- Remove air inlet duct (2).
- Disconnect the negative battery cable.
- Remove cooling fan assembly. Refer to FAN, COOLING, REMOVAL .
- Remove bolts (1) and the heat shield (2).
- Disconnect the fuel temperature sensor harness connector (2).
- Remove the fuel temperature sensor (1).
- Remove and discard sealing washer and O-ring.