Wheel Hub: Remove & Replace
WARNING: This page is about the Compass Altitude, 2.0L Eng VIN A, Automatic CVT Trans, which is a different variant/trim than selected.
Includes: Repack and adjust Bearings (where applicable).| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| FWD, Rear,Hub and Bearing Assembly,w/Disc Brakes,Both | 1.6 | B | ||
| FWD, Rear,Hub and Bearing Assembly,w/Disc Brakes,One Side | 0.9 | B | ||
| Front,Both Sides | Includes: R&I Steering Knuckles. DOES NOT include wheel alignment. | 3.4 | B | |
| Front,One Side | Includes: R&I Steering Knuckle. DOES NOT include wheel alignment. | 1.8 | B | |
| Rear,Hub and Bearing Assembly,w/Drum Brakes,Both | 1.2 | B | ||
| Rear,Hub and Bearing Assembly,w/Drum Brakes,One Side | 0.7 | B | ||
| Combination Procedure: DISC ROTOR: Correct: | ||||
| Lateral Runout,Each | Correct Rotor lateral runout by indexing or correction plate. | 0.2 | B | |
| Combination Procedure: HUB & ROTOR DISC: Clean & Inspect: | ||||
| Corrosion,Each | Clean any rust or corrosion from mating surface of Hub/Axle Flange and Brake Rotor. | 0.2 | B | |