FixVault
Home › Jeep › 2015 › Compass Limited, AWD, Automatic Trans › Repair and Diagnosis › External Pages › Different car › Section 228 (T355 (Service Information)) › Vehicle Speed Sensor › Installation › Installation

Vehicle Speed Sensor: Installation: Installation

WARNING: This page is about a different car, the 2013 Jeep Patriot and 2013 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a NEW O-ring, install the speed sensor to the transaxle.
  2. Install the bolt and tighten to 7 N.m (60 in. lbs.).
  3. Connect speed sensor connector.
  4. Install the air cleaner housing. Refer to 2.0L BODY, AIR CLEANER, INSTALLATION or 2.4L BODY, AIR CLEANER, INSTALLATION .
About FixVault