FixVault
Home › Jeep › 2015 › Compass Limited, AWD, Automatic Trans › Repair and Diagnosis › Transmission › Automatic Trans › Engine Cooling System › Accessory Drive › TENSIONER, Belt › Removal › Gas Engine

Gas Engine

Fig 1: Splash Shield
GC0098462Courtesy of CHRYSLER GROUP, LLC
  1. Raise vehicle on hoist.
  2. Remove belt splash shield (3).
    Fig 2: Accessory Drive Belt - World Engine
    GC0083970Courtesy of CHRYSLER GROUP, LLC
    1 - POWER STEERING PUMP
    2 - ACCESSORY DRIVE BELT
    3 - GENERATOR
    4 - CRANKSHAFT PULLEY
    5 - LOWER IDLER PULLEY
    6 - CRANKSHAFT PULLEY
    7 - WATER PUMP PULLEY
    8 - ACCESSORY DRIVE BELT TENSIONER
    9 - UPPER IDLER PULLEY
  3. Remove accessory drive belt. Refer to BELT, SERPENTINE, REMOVAL .
  4. Remove accessory drive belt tensioner mounting bolt. Remove accessory drive belt tensioner (8).
About FixVault