FixVault
Home › Jeep › 2015 › Compass Limited, FWD, Automatic CVT Trans › Repair and Diagnosis › External Pages › Different car › Section 84 (Engine Cooling System) › Engine › Heater, Engine Block › Installation › Installation

Heater, Engine Block: Installation: Installation

WARNING: This page is about a different car, the 2012 Jeep Patriot and 2012 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
  1. Thoroughly clean bore hole.
  2. Insert block heater assembly into bore.
  3. Install retaining clip.
  4. Connect power cord to block heater.
    Fig 1: Air Cleaner Inlet
    GC0098469Courtesy of CHRYSLER GROUP, LLC
  5. Install air intake inlet.
  6. Install engine cover.
About FixVault