FixVault
Home › Jeep › 2015 › Compass Limited, FWD, Automatic Trans › Repair and Diagnosis › External Pages › Different car › Section 314 (Ignition System (Service Information)) › Module, Glow Plug › Removal › Removal

Module, Glow Plug: Removal: Removal

WARNING: This page is about a different car, the 2014 Jeep Patriot and 2014 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the air cleaner assembly. .
  3. Disconnect the fuel lines.
    Fig 1: Identifying Glow Plug Harness Connector, Glow Plug Module & Power Supply Harness Connector
    GC0138477Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect the glow plug harness connector (1).
  5. Disconnect the power supply harness connector (3) from the glow plug module (2).
    Fig 2: Identifying Glow Plug Module & Bolts
    GC0138478Courtesy of CHRYSLER GROUP, LLC
  6. Remove the bolts (2) and the glow plug module (1).
About FixVault