INSULATOR, Engine Mount, Front: Installation: Installation
WARNING: This page is about a different car, the 2009 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
- Position the insulator mount and install the insulator mount through bolt.
- Lower the engine until the cylinder block-to-insulator mount bolts can be installed.
- Remove the jack and block of wood.
- Tighten the cylinder block-to-insulator mount bolts to 61 N.m (45 ft. lbs.).
- Install and tighten the through bolt retaining nut to 61 N.m (45 ft. lbs.).
- Install the fan blade, fan clutch and fan shroud.