FixVault
Home › Jeep › 2015 › Renegade Trailhawk › Repair and Diagnosis › Engine Performance › Ignition System (Service Information) › Switch, Ignition › Removal And Installation › Removal And Installation › Installation

Removal And Installation: Installation

  1. Position the ignition switch with steering lock in its housing.
  2. Screw in and tighten the new special bolts until the heads shear off.
  3. Place the electric steering control device in its housing and tighten the screws to the proper torque specification. Refer to SPECIFICATIONS .
  4. Install the steering column. Refer to COLUMN, REMOVAL AND INSTALLATION .
About FixVault