Capacitor, Ignition: Installation: 3.2L

Fig 1: Ignition Capacitor, Electrical Connector & Bolt

Courtesy of CHRYSLER GROUP, LLC

1. Position capacitor (2) to the rear of the cylinder head.
2. Tighten nut (3) to 7 N.m (60 in. lbs.).
3. Connect electrical connector (1) to coil capacitor.
4. Install the main engine harness retainers onto the intake manifold.
5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.