Module Removal

NOTE:

This procedure is for Alpine audio system. For all other audio systems, refer to AMPLIFIER, REMOVAL .

Fig 1: Fasteners, Wire Harness Connectors & ANC Module Bracket

Courtesy of CHRYSLER GROUP, LLC

Disconnect and isolate the battery negative cable.
Remove the right quarter trim panel. Refer to PANEL, QUARTER TRIM, REMOVAL .
Remove the subwoofer. Refer to SPEAKER, REMOVAL .
Disconnect the two wire harness connectors (3) from the Active Noise Cancellation (ANC).
Remove the fasteners (1), (4) and remove the ANC module (2).
Remove the retainers from the ANC module bracket (2).