Module, Intrusion Transceiver: Installation: Installation

Fig 1: Motion Sensor Connector

Courtesy of CHRYSLER GROUP, LLC

1. Position the Intrusion Transceiver Module (ITM) (2) into the mount integral to the overhead console housing. Be certain that all of the latch features are fully engaged
2. Connect the intrusion module sensor pigtail wire harness connector (1) to the ITM connector receptacle.
3. Install the overhead console into the headliner. Refer to CONSOLE, OVERHEAD, FRONT, INSTALLATION .
4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.