FixVault
Home › Jeep › 2016 › Renegade Trailhawk › Repair and Diagnosis › Engine Mechanical › Fuel System › Fuel Injection › Throttle Body › Removal And Installation › 1.4L › Installation

Removal And Installation: 1.4L: Installation

  1. Install a new gasket on the inlet plenum.
  2. Install the throttle body positioning it correctly on the centering pin.
  3. Install the throttle body retaining screws and tighten to the proper specification. Refer to FUEL INJECTION, SPECIFICATIONS .
  4. Install the bracket and securely tighten the nut.
  5. Connect the electrical connection of the throttle body.
  6. Install the air supply hose from throttle body to rigid pipe and securely tighten the clamp.
  7. Install the negative battery cable.
  8. Install the engine cover. Refer to COVER, ENGINE, REMOVAL AND INSTALLATION .
About FixVault