FixVault
Home › Jeep › 2016 › Wrangler Rubicon, Automatic Trans › Repair and Diagnosis › Engine Performance › Fuel Delivery › Fuel System › Fuel Injection, Diesel › Sensor, Air Temperature, Intake › Removal › Removal

Sensor, Air Temperature, Intake: Removal: Removal

Fig 1: IAT/MAP Sensor Harness Connector, Bolt & IAT/MAP Sensor
GC0148204Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect the negative battery cable.
  2. Clean area around sensor.
  3. Disconnect IAT/MAP sensor harness connector (3).
  4. Remove bolt (2) and IAT/MAP sensor (1).
About FixVault