FixVault
Home › Jeep › 2016 › Wrangler Rubicon, Automatic Trans › Repair and Diagnosis › Transmission › Automatic Trans › Engine Cooling System › Engine › Pump, Water › Removal › 2.8L

Pump, Water: Removal: 2.8L

  1. Disconnect the negative battery cable.
  2. Remove the radiator fan. Refer to FAN, COOLING, REMOVAL .
  3. Drain the cooling system. Refer to STANDARD PROCEDURE .
    Fig 1: Removing/Installing Timing Belt
    GC0082180Courtesy of CHRYSLER GROUP, LLC
  4. Remove the timing belt.
    Fig 2: Removing/Installing Inner Front Cover
    GC0085597Courtesy of CHRYSLER GROUP, LLC
  5. Remove the inner timing cover.
    Fig 3: Identifying Water Pump
    GC0085594Courtesy of CHRYSLER GROUP, LLC
  6. Remove bolts and the pump assembly.
About FixVault