Navigation/Telecommunication (Service Information): Microphone: Installation: Installation

Fig 1: Microphone & Trim Panel

Courtesy of CHRYSLER GROUP, LLC

1. Align and insert the microphone (2) with the receptacle on the back of the driver side upper A-pillar trim (3) until the latch tabs (1) on each side of the microphone snap into place.
   Fig 2: Microphone Harness & Instrument Panel Harness

   Courtesy of CHRYSLER GROUP, LLC
2. Reconnect the microphone pigtail wire harness connector (1) to the instrument panel wire harness connector (2).
3. Reinstall the upper trim onto the driver side A-pillar. Refer to PANEL, A-PILLAR TRIM, INSTALLATION .