FixVault
Home › Jeep › 2017 › Renegade Limited, FWD › Repair and Diagnosis › External Pages › Different car › Section 189 (Power Distribution) › Module, Power Inverter › Removal And Installation › Removal And Installation › Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2016 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the module electrical connector.
  2. Position the inverter module and tighten the screws.
  3. Install the glove box. Refer to GLOVE BOX, INSTRUMENT PANEL, REMOVAL AND INSTALLATION .
  4. Connect the negative battery cable.
About FixVault