Installation - Bracket
WARNING: This page is about a different car, the 2016 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
- Check that the bracket is not damaged.
- Place the new bracket (1a) bushings anchor (1b) supplied with the spare.
- Turn with a key bushings (1b) in their seats about half a turn, until it reaches the stop (approximately 14 daN / m).
- Position the bracket and fasten with rivets.
- Install the front fascia. Refer to FASCIA, FRONT, REMOVAL AND INSTALLATION .
- Connect the negative battery cable.