Center, Power Distribution (PDC): Installation
WARNING: This page is about a different car, the 2017 RAM ProMaster 3500, 2017 RAM ProMaster 2500, and 2017 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.
- Install the PDC tp thje hinge pins. Pull out on the PDC housing at the fit area if needed to pop the PDC into place.
- Connect all the electrical connectors from the harness to the back of the PDC. Please verify no loose connectors and uninstalled connectors before snapping the PDC to the closed position within the housing.
- Connect the electrical connection for the positive cable and tighten the nut (1).
- Place the cover in position and tighten the bolts.
- Connect the negative battery terminal.