Sensor, Boost Pressure: Removal
WARNING: This page is about a different car, the 2017 RAM ProMaster 3500, 2017 RAM ProMaster 2500, and 2017 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable.
- Remove the radiator crossmember. Refer to CROSSMEMBER, RADIATOR, REMOVAL
.
- Loosen clamp and remove the Charge Air Cooler (CAC) hose from the EGR air flow control valve elbow.
- Clean area around the boost pressure sensor.
- Disconnect the boost pressure sensor wire harness connector (1).
- Remove bolt (2) and the boost pressure sensor (1).