Heater, Engine Block: Installation: 3.6L
WARNING: This page is about a different car, the 2017 RAM ProMaster 3500, 2017 RAM ProMaster 2500, and 2017 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.
- Clean the engine block hole and heater seat.
- Install the engine block heater (1) and tighten the bolt (2) to 12 N.m (9 ft. lbs.).
- Connect the power cord plug to the engine block heater.
- Install the generator. Refer to GENERATOR, INSTALLATION .