Sensor, Coolant Temperature: Installation: 3.6L
WARNING: This page is about a different car, the 2017 RAM ProMaster 3500, 2017 RAM ProMaster 2500, and 2017 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.
- Apply MOPAR® thread sealant with PFTE to sensor threads.
- Install the coolant temperature sensor (1) into the cylinder head and tighten to 27 N.m (20 ft. lbs.).
- Connect the coolant temperature sensor wire harness connector.
- Remove support and lower the vehicle.
- Fill the cooling system. Refer to STANDARD PROCEDURE .
- Connect the negative battery cable.