FixVault
Home › Jeep › 2017 › Wrangler Sahara, Automatic Trans › Repair and Diagnosis › External Pages › Different car › Section 5 (Electronic Control Modules (Service Information)) › Module, Instrument Panel Cluster › Removal › Cluster Lens

Cluster Lens

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the instrument cluster from the instrument panel. Refer to REMOVAL .
    GC0158370Courtesy of CHRYSLER GROUP, LLC
  3. Working around the perimeter of the cluster housing, disengage each of the latches that secure the cluster lens (2), to the instrument cluster housing (1).
  4. Remove the lens from the face of the instrument cluster.
About FixVault