FixVault
Home › Jeep › 2018 › Compass Trailhawk › Repair and Diagnosis › External Pages › Different car › Section 113 (Fuel System) › Fuel Injection, Diesel › Sensor, Boost Pressure › Removal And Installation › Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2019 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the boost pressure sensor and securely tighten the screw.
  2. Connect the boost pressure sensor wire harness connector.
  3. Install the engine cover. Refer to the appropriate Service Information .
  4. Connect the negative battery cable.
About FixVault