Removal And Installation: Installation

WARNING: This page is about a different car, the 2019 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of CHRYSLER GROUP, LLC

Install the flexplate (1).
Install the washer (2).
Install NEW flexplate bolts (3) and tighten in a criss-cross pattern to the proper specification. Refer to TORQUE SPECIFICATIONS .
CAUTION:
Do not use an impact socket or a thick walled socket when removing or installing the flexplate retaining bolts, damage to the crankshaft, internal engine or the transmission may occur.
Install the transmission. Refer to REMOVAL AND INSTALLATION .