FixVault
Home › Jeep › 2018 › Compass Trailhawk › Repair and Diagnosis › External Pages › Different car › Section 117 (Ignition System (Service Information)) › Plug, Glow › Removal And Installation › Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2019 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the tool, install the glow plug and tighten to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
  2. Connect the glow plug wire harness connectors
  3. Install the engine cover. Refer to the appropriate Service Information .
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
About FixVault