Cluster Lens
WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
- Position the cluster lens (5) over the face of the cluster hood and mask unit (3). Be certain that the rubber boots (4) for the odometer/trip odometer switch and reconfigurable display switch push buttons are installed in the clearance holes in the lens, and that the push buttons are engaged into the boots.
- Working around the perimeter of the cluster, press the lens over the face of the hood and mask until each of the nine integral latch features is fully engaged in the receptacles of the hood and mask or the cluster housing (2).
- Reinstall the instrument cluster onto the instrument panel.