Module, Power Inverter: Removal: Removal

WARNING: This page is about a different car, the 2016 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Two Retainers, Electrical Connector & Power Inverter Module

GC0146167

Courtesy of CHRYSLER GROUP, LLC

Disconnect and isolate the battery negative cable.
Remove the passenger side front seat. Refer to SEAT, FRONT, REMOVAL .
Remove the two retainers (2).
Disconnect the electrical connector (1).
Slide the power inverter module (3) out of the bracket.