FixVault
Home › Jeep › 2018 › Grand Cherokee Trackhawk › Repair and Diagnosis › Accessories & Equipment › Drivers Assistance Systems - ADAS › Electronic Control Modules (Service Information) › Module, Instrument Panel Cluster › Removal › Cluster Hood, Lens And Mask

Cluster Hood, Lens And Mask

  1. Disconnect and isolate the negative battery cable.
  2. Remove the instrument cluster from the instrument panel. Refer to CLUSTER ASSEMBLY .
    GC0158377Courtesy of CHRYSLER GROUP, LLC
  3. Remove the instrument cluster bezel (2). Refer to BEZEL, INSTRUMENT CLUSTER, REMOVAL .
    GC0158370Courtesy of CHRYSLER GROUP, LLC
  4. Working around the perimeter of the cluster housing, disengage each of the latches that secure the cluster lens (2), to the instrument cluster housing (1).
  5. Remove the lens, hood and mask assembly from the face of the instrument cluster.
About FixVault